Proces-Verbal de Classement e Appréciation de Laboratoire France

Proces-Verbal de Classement e Appréciation de Laboratoire France

Proces-Verbal de Classement, Appréciation de Laboratoire ed Avis de Chantier

Proces-Verbal de Classement e Appréciation de Laboratoire France

Proces-Verbal de Classement, Appréciation de Laboratoire ed Avis de Chantier

Proces-Verbal de Classement and Appréciation de Laboratoire according to the decree of March 14th 2011 modified by the decree of March 22nd 2004 of the French Ministry of the Interior (Résistance au Feu des Eléments de Construction selon l'arrêté du 14 mars 2011 modifiant l'arrêté du 22 mars 2004 du Ministère de l'Intérieur)

Tipo: Certification

Standard: NF EN1634-1

Clienti:

Proces-Verbal de Classement is required for the sale of non CE marked fire doors in France. In case of recognition of tests carried out, the relevant Appréciation de laboratoire is also required. The minutes or the classification reports attest to the fire performance of products or construction elements tested by a resistance laboratory. This is the laboratory's declaration according to the law, which complies, as regards resistance, with the provisions of the decree of the Ministère de l'Intérieur, article 11 of March 22nd 2004, modified by the decree of March 14th 2011. These documents can be established by laboratories recognized by the French Ministry of the Interior.
EDITORIAL BOARD
TESTS MADE IN FRANCE, OR EXTENSION OF TESTS MADE IN EUROPE They can be set up following tests carried out in these same laboratories, or in another European laboratory, which one of these laboratories analyzes and verifies. The validity and the methods of establishment and renewal of the PV varies from institution to institution. Normally, for tests not carried out at the French laboratory, there is talk of a documentary work for the first institution valid for one year, and an inspection visit that renews the document for four years.
CHANGES TO THE TESTED DOORS
Some changes compared to the tested sample in addition to the direct field of application of the results can be included in the Proces Verbal. A further tool available is the Avis de Chantier, which allows you to make specific changes in a specific construction site, with a precise engineering evaluation of the laboratory.
OLD NATIONAL STANDARD
The old French national standard, according to the decrees of April 21st, 1983 and August 3rd, 1999 for national regulations, expected for doors: • Mechanical stability, flame retardancy and resistance to flammable gases: Pare-Flamme, corresponding to EW. • Mechanical stability, flame retardancy and flammable gases and thermal insulation: Coupe feu, corresponding to EI. The Pare Flamme and Coupe Feu classifications and the relative PVs are no longer valid since 22 March 2011. These tests must be repeated for new PVs in accordance with European regulations. The tests are now performed according to the standard NF EN 1634-1.
ARE THE TESTS CARRIED OUT IN FRANCE VALID IN ITALY?
If we are talking about CE marked doors, the marking allows marketing in the states of the Union. Check whether the mandatory characteristics for the recipient country are met and that the documentation is in the language of the country where they are marketed. For more information on marking, go to the CE MARKING section of our website. For unmarked doors, then they must have approval. For more information on the approval, go to the APPROVAL section of our website.
OTHER VOLUNTARY BRANDS, REAL TRADE NATIONAL BARRIERS
In the specifications we can very often find references to MARQUEs NF, to which the products must respond. They are voluntary brands, which however acted as a barrier to foreign products. We see them better below. D.A.S., Dispositifs Actionnés de Sécurité Another important certification for doors in France is the D.A.S, Dispositifs Actionnés de Sécurité, according to the standards: NF S 61-937 parts 2 and 3. In accordance with the decree of July 21st, 1994, which applies some provisions relating to fire safety systems (SSI), all self-closing fire closing units installed in public buildings and public buildings must meet the specifications of the standard NF S61-937 relatively to the implemented safety devices (DAS). According to this decree, the suitability for use of all the DAS, with reference to the relative standards, must be certified by a specific test report issued by one of the laboratories approved by the Ministry of the Interior (LCPP; CNPP; CSTB; CTICM ; EFECTIS). Special characteristics and requirements of swing doors with automatic closing, which are DAS compartments, are shown in sheet X of appendix A of standard NF S61-937. Once the tests have been carried out, AFNOR, the French standardization body, carries out an inspection visit. MARQUE NF, NF131 and NF277 These are voluntary trademarks, which likewise provide initial type tests by recognized laboratories and validation and inspection by FCBA or AFNOR. Possono essere inclusi in capitolati d’appalto, a quel punto diventano necessari per poter vendere il proprio prodotto in quel cantiere.
THE CHEMOLLI FIRE CONTRIBUTION
When it comes to testing, we provide our experience and our KNOW-HOW. Having always done this type of activity, as specialists, we offer you complete advice during all the laboratory experimentation phases, from design to documentation of results. THE METHOD Listening is the most important phase of our interaction: we want you to develop a product that is the sum of your identity and your needs. First of all, we'll try to understand your real needs, the channels and the markets you want to measure yourself on. Then we will show you how the testing and certification process takes place: we need to deal with you, to fully grasp your point of view. Then, we concert a proposal that respects - compatibly with the required performances - your product lines, your production lines and, as far as possible, the potential economies of scale by using products and methodologies already consolidated in your company. EMPATHY Beyond the opportunities, which we will show you, we will then advise you what we would do, in your shoes. We advise with our experience on what, how and where to test. In which laboratory should you test? In the one that best suits your needs! THE PROJECT Once the key is turned, we prepare a project that is exhaustive of all the details. Which materials and components to use, an important part of our dialogue on which we can best advise you. In addition to this, a cost sheet and a forecast of weights, to allow you to check if your goals will be achieved. Using the best practices in the sector, we are convinced of this. ATYPICAL CONSULTANTS: WE TAKE CARE OF THE TESTING ACTIVITY A consultant gives advice, then lets the client put it into practice. We are not like this: we take off tie and put on our work clothes when needed. Once the production of the samples has been launched, we are present during the gluing of the doors, we offer support during processing and hardware installation, we proceed with our technicians to install the samples in the laboratory and we are physically present at the test. We manage the post-test documentation review phase, we illustrate the documentation and remain available for all issues related to results management. CERTIFICATION In addition, we offer you complete advice during all certification phases, assisting you:
  • in planning and budgeting of activities, to determine an investment plan;
  • in all relations with the notified body;
  • during sampling (collection of products to be tested);
  • to implement your FPC - Factory Production Control;
  • to prepare the necessary documentation including instructions, labels;
  • with our presence during the initial inspections;
  • subsequently, as support for all management issues.
IN DEPTH

Proces-Verbal de Classement and Appréciation de Laboratoire according to the decree of March 14th 2011 modified by the decree of March 22nd 2004 of the French Ministry of the Interior (Résistance au Feu des Eléments de Construction selon l'arrêté du 14 mars 2011 modifiant l'arrêté du 22 mars 2004 du Ministère de l'Intérieur)

Tipo: Certification

Standard: NF EN1634-1

Clienti:

Proces-Verbal de Classement is required for the sale of non CE marked fire doors in France. In case of recognition of tests carried out, the relevant Appréciation de laboratoire is also required. The minutes or the classification reports attest to the fire performance of products or construction elements tested by a resistance laboratory. This is the laboratory's declaration according to the law, which complies, as regards resistance, with the provisions of the decree of the Ministère de l'Intérieur, article 11 of March 22nd 2004, modified by the decree of March 14th 2011. These documents can be established by laboratories recognized by the French Ministry of the Interior.
EDITORIAL BOARD
TESTS MADE IN FRANCE, OR EXTENSION OF TESTS MADE IN EUROPE They can be set up following tests carried out in these same laboratories, or in another European laboratory, which one of these laboratories analyzes and verifies. The validity and the methods of establishment and renewal of the PV varies from institution to institution. Normally, for tests not carried out at the French laboratory, there is talk of a documentary work for the first institution valid for one year, and an inspection visit that renews the document for four years.
CHANGES TO THE TESTED DOORS
Some changes compared to the tested sample in addition to the direct field of application of the results can be included in the Proces Verbal. A further tool available is the Avis de Chantier, which allows you to make specific changes in a specific construction site, with a precise engineering evaluation of the laboratory.
OLD NATIONAL STANDARD
The old French national standard, according to the decrees of April 21st, 1983 and August 3rd, 1999 for national regulations, expected for doors: • Mechanical stability, flame retardancy and resistance to flammable gases: Pare-Flamme, corresponding to EW. • Mechanical stability, flame retardancy and flammable gases and thermal insulation: Coupe feu, corresponding to EI. The Pare Flamme and Coupe Feu classifications and the relative PVs are no longer valid since 22 March 2011. These tests must be repeated for new PVs in accordance with European regulations. The tests are now performed according to the standard NF EN 1634-1.
ARE THE TESTS CARRIED OUT IN FRANCE VALID IN ITALY?
If we are talking about CE marked doors, the marking allows marketing in the states of the Union. Check whether the mandatory characteristics for the recipient country are met and that the documentation is in the language of the country where they are marketed. For more information on marking, go to the CE MARKING section of our website. For unmarked doors, then they must have approval. For more information on the approval, go to the APPROVAL section of our website.
OTHER VOLUNTARY BRANDS, REAL TRADE NATIONAL BARRIERS
In the specifications we can very often find references to MARQUEs NF, to which the products must respond. They are voluntary brands, which however acted as a barrier to foreign products. We see them better below. D.A.S., Dispositifs Actionnés de Sécurité Another important certification for doors in France is the D.A.S, Dispositifs Actionnés de Sécurité, according to the standards: NF S 61-937 parts 2 and 3. In accordance with the decree of July 21st, 1994, which applies some provisions relating to fire safety systems (SSI), all self-closing fire closing units installed in public buildings and public buildings must meet the specifications of the standard NF S61-937 relatively to the implemented safety devices (DAS). According to this decree, the suitability for use of all the DAS, with reference to the relative standards, must be certified by a specific test report issued by one of the laboratories approved by the Ministry of the Interior (LCPP; CNPP; CSTB; CTICM ; EFECTIS). Special characteristics and requirements of swing doors with automatic closing, which are DAS compartments, are shown in sheet X of appendix A of standard NF S61-937. Once the tests have been carried out, AFNOR, the French standardization body, carries out an inspection visit. MARQUE NF, NF131 and NF277 These are voluntary trademarks, which likewise provide initial type tests by recognized laboratories and validation and inspection by FCBA or AFNOR. Possono essere inclusi in capitolati d’appalto, a quel punto diventano necessari per poter vendere il proprio prodotto in quel cantiere.
THE CHEMOLLI FIRE CONTRIBUTION
When it comes to testing, we provide our experience and our KNOW-HOW. Having always done this type of activity, as specialists, we offer you complete advice during all the laboratory experimentation phases, from design to documentation of results. THE METHOD Listening is the most important phase of our interaction: we want you to develop a product that is the sum of your identity and your needs. First of all, we'll try to understand your real needs, the channels and the markets you want to measure yourself on. Then we will show you how the testing and certification process takes place: we need to deal with you, to fully grasp your point of view. Then, we concert a proposal that respects - compatibly with the required performances - your product lines, your production lines and, as far as possible, the potential economies of scale by using products and methodologies already consolidated in your company. EMPATHY Beyond the opportunities, which we will show you, we will then advise you what we would do, in your shoes. We advise with our experience on what, how and where to test. In which laboratory should you test? In the one that best suits your needs! THE PROJECT Once the key is turned, we prepare a project that is exhaustive of all the details. Which materials and components to use, an important part of our dialogue on which we can best advise you. In addition to this, a cost sheet and a forecast of weights, to allow you to check if your goals will be achieved. Using the best practices in the sector, we are convinced of this. ATYPICAL CONSULTANTS: WE TAKE CARE OF THE TESTING ACTIVITY A consultant gives advice, then lets the client put it into practice. We are not like this: we take off tie and put on our work clothes when needed. Once the production of the samples has been launched, we are present during the gluing of the doors, we offer support during processing and hardware installation, we proceed with our technicians to install the samples in the laboratory and we are physically present at the test. We manage the post-test documentation review phase, we illustrate the documentation and remain available for all issues related to results management. CERTIFICATION In addition, we offer you complete advice during all certification phases, assisting you:
  • in planning and budgeting of activities, to determine an investment plan;
  • in all relations with the notified body;
  • during sampling (collection of products to be tested);
  • to implement your FPC - Factory Production Control;
  • to prepare the necessary documentation including instructions, labels;
  • with our presence during the initial inspections;
  • subsequently, as support for all management issues.
IN DEPTH

Request info about the certification


    Request info about the certification