01

Fire resistance and control tests for doors, closing systems, openable windows and their construction components in relation to the dispersion of smoke - Part 1: Fire resistance and control tests for doors, closing systems, openable windows.

Tipo: Test standard

Standard: UNI EN 1634-1:2014

Clienti: GarofoliBragaMethisScrignoL'invisibile by PortarredoOpen.co (Cormo/Cooplegno)3elleCisaIseo

There are various laboratories around the world that are fitted with various types of ovens measuring from 3×3 metres to 5×9 metres to accommodate different types of products to be tested. The ovens are in rooms featuring assorted burners which provide a standardised heating curve of the room. Products are positioned on a standardised support or on a frame and any losses of integrity and thermal insulation are monitored. Surface radiation can also be measured.

02

Fire resistance and control tests for doors, closing systems, openable windows and their construction components in relation to the dispersion of smoke - Part 2: Resistance tests for construction components

Tipo: Test standard

Standard: UNI EN 1634-2:2009

Clienti: Cisa

This standard that is dedicated to accessories (hinges, handles, locks, emergency push bars and other) allows small scale tests to demonstrate that such accessories do not have a negative effect on the fire resistance of a door. If the previously tested door is within the extended application range of test results, the door manufacturer can fit the accessory (component) without having to re-test the door.

03

Fire resistance tests for non load-bearing components - Walls

Tipo: Test standard

Standard: UNI EN 1364-1:2002

Clienti: Methis

There are various laboratories around the world that are fitted with various types of ovens measuring from 3×3 metres to 5×9 metres to accommodate different types of products to be tested. The ovens are in rooms featuring assorted burners which provide a standardised heating curve of the room. Products are positioned on a standardised support or on a frame and any losses of integrity and thermal insulation are monitored. Surface radiation can also be measured.

04

Extended application of fire resistance and/or control tests for doors, closing systems, openable windows and their construction components in relation to the dispersion of smoke.

Tipo: Extended application

Standard: UNI EN 15269

Clienti: GarofoliL'invisibile by Portarredo

This quite numerous family of standards gives indications about how products can (or cannot) be subsequently be modified beyond the field of application stipulated in the test standard.

05

Extended application of the fire resistance results - Non load-bearing walls

Tipo: Extended application

Standard: UNI EN 15254

Clienti: Methis

This quite numerous family of standards gives indications about how products can (or cannot) be subsequently be modified beyond the field of application stipulated in the test standard.

06

Fire classification of products and construction components

Tipo: General standard

Standard: UNI EN 13501

Clienti: GarofoliBragaMethisScrignoL'invisibile by PortarredoOpen.co3elleCisaIseo

This is the general standard that shows mainly the various classes and performance characteristics obtainable from products.

07

Fire resistance tests for plant equipment that provides services - Part 10: Smoke control shutters

Tipo: Test standard

Standard: UNI EN 1366-10:2011

Clienti:

Shutter tests are performed in various laboratories around the world. The ovens are in rooms featuring assorted burners which provide a standardised heating curve of the room. Products are positioned on a standardised support or on a frame and any losses of integrity and thermal insulation are monitored.

08

Fire resistance and control tests for doors, closing systems, openable windows and their construction components in relation to the dispersion of smoke - Part 3: Control tests for doors and closing systems in relation to the dispersion of smoke

Tipo: Test standard

Standard: UNI EN 1634-3:2005

Clienti: Open.coGarofoliBraga

With this standard, hot (200 °C) and cold smoke tests can be performed. These are known respectively as Sm and Sa tests. Leaks are measured in cubic metres per hour for each metre of seal excluding the seal at the bottom of the door. This is a required component for many markets including in the UK, Germany and the Arab Emirates.

01

Fire resistance and control tests for doors, closing systems, openable windows and their construction components in relation to the dispersion of smoke - Part 1: Fire resistance and control tests for doors, closing systems, openable windows.

Tipo: Test standard

Standard: UNI EN 1634-1:2014

Clienti:

There are various laboratories around the world that are fitted with various types of ovens measuring from 3×3 metres to 5×9 metres to accommodate different types of products to be tested. The ovens are in rooms featuring assorted burners which provide a standardised heating curve of the room. Products are positioned on a standardised support or on a frame and any losses of integrity and thermal insulation are monitored. Surface radiation can also be measured.

02

Fire resistance and control tests for doors, closing systems, openable windows and their construction components in relation to the dispersion of smoke - Part 2: Resistance tests for construction components

Tipo: Test standard

Standard: UNI EN 1634-2:2009

Clienti:

This standard that is dedicated to accessories (hinges, handles, locks, emergency push bars and other) allows small scale tests to demonstrate that such accessories do not have a negative effect on the fire resistance of a door. If the previously tested door is within the extended application range of test results, the door manufacturer can fit the accessory (component) without having to re-test the door.

03

Fire resistance tests for non load-bearing components - Walls

Tipo: Test standard

Standard: UNI EN 1364-1:2002

Clienti:

There are various laboratories around the world that are fitted with various types of ovens measuring from 3×3 metres to 5×9 metres to accommodate different types of products to be tested. The ovens are in rooms featuring assorted burners which provide a standardised heating curve of the room. Products are positioned on a standardised support or on a frame and any losses of integrity and thermal insulation are monitored. Surface radiation can also be measured.

04

Extended application of fire resistance and/or control tests for doors, closing systems, openable windows and their construction components in relation to the dispersion of smoke.

Tipo: Extended application

Standard: UNI EN 15269

Clienti:

This quite numerous family of standards gives indications about how products can (or cannot) be subsequently be modified beyond the field of application stipulated in the test standard.

05

Extended application of the fire resistance results - Non load-bearing walls

Tipo: Extended application

Standard: UNI EN 15254

Clienti:

This quite numerous family of standards gives indications about how products can (or cannot) be subsequently be modified beyond the field of application stipulated in the test standard.

06

Fire classification of products and construction components

Tipo: General standard

Standard: UNI EN 13501

Clienti:

This is the general standard that shows mainly the various classes and performance characteristics obtainable from products.

07

Fire resistance tests for plant equipment that provides services - Part 10: Smoke control shutters

Tipo: Test standard

Standard: UNI EN 1366-10:2011

Clienti:

Shutter tests are performed in various laboratories around the world. The ovens are in rooms featuring assorted burners which provide a standardised heating curve of the room. Products are positioned on a standardised support or on a frame and any losses of integrity and thermal insulation are monitored.

08

Fire resistance and control tests for doors, closing systems, openable windows and their construction components in relation to the dispersion of smoke - Part 3: Control tests for doors and closing systems in relation to the dispersion of smoke

Tipo: Test standard

Standard: UNI EN 1634-3:2005

Clienti:

With this standard, hot (200 °C) and cold smoke tests can be performed. These are known respectively as Sm and Sa tests. Leaks are measured in cubic metres per hour for each metre of seal excluding the seal at the bottom of the door. This is a required component for many markets including in the UK, Germany and the Arab Emirates.

Ask about this certification
Fire resistance

Ask about this certification
Fire resistance